top of page

Pad Levellers - Cars & Karts

Height adjustable pad levellers are an alternative to the complete floor, they can be easily transported to the race track and may be ideal where space is limited.

​

The pad levellers can be adjusted at each corner with each platform featuring a level for levelling of the platform.

​

There are two sizes which take 15x15x2.5" Intercomp / Longacre type scales or a separate design for 15x15" Proform slimline scales.

We also have pad levellers specifically designed for the STR corner weight scales, please view in the chassis shop.

 

We also produce 10X10X2" scales (typically for kart use).

​

This can also be purchased as part of a set up kit offer with tracking, camber and bump steer gauges via the offer shop.

CHASSIS SET UP EQUIPMENT

Aluminium Box Section Pad Levellers

Aluminium box section pad levellers.

​

Designed to suit 15x15" scales, powder coated black and supplied in sets of 4 with anti slip levelling feet.

Pad Levellers Including Partitioned Flight Case

This large flight case has been designed to provide safe storage for valuable corner weight scales and pad levellers whilst being transportable to and from the circuit.

 

Each case is internally partitioned and provides space for four scales, four pad levellers and a removable shelf provides storage space for control boxes separately from the heavier components.

​

Recessed pull out handles on each side with four castor wheels makes the case easy to transport, two of which are braked to help with storage in transit. The case also has two butterfly latches with provision for a pad lock to securely fasten the lid.

​

Pad Levellers With Roll Off Platforms / Raised Height Tables

Height adjustable scale pad levellers with inbuilt roll off platforms and wheel stop.

​

Designed to suit 15x15x2.5" scales and come supplied in a set of four with anti slip levelling feet.

​

Also available with a partitioned flight case for storage and as part of a set up kit offer with tracking, camber and bump steer gauges via the offer shop.

​

We can now offer fully TIG welded box section pad leveller tables for use when extra working height is required. 500mms tall and supplied in sets of four with or without pad levellers.

Raised Height Tables - Floating

Raised height alignment tables allow for setting up a vehicle at a raised height, providing easier access for making adjustments.

​

Designed for use with smaller wheelbase cars and where the larger set may then be in the way of ramps.

​

Featuring ball transfer units in the base and sides to allow scales or our turn plates / set up pads to float as the vehicle is lowered onto the stands due to track width changes.

​

Supplied with an insert tray to hold 15x15" scales / our turn plates to allow both to float when in use.

​

We also offer floating set up pads for use when making adjustments with the wheels on.

Total height = 800mms to the top of the scale.

​

Featuring wheel stops to prevent the vehicle rolling off, fully TIG welded and powder coated blue as standard, other colours are available.

bottom of page