Trailer Flight Case Roll Cabinet

New flight case cabinet designed for use in the front or back of a trailer.

​

Featuring 12 removable boxes, sliding lockable doors (from above), fold out benches on each side, 6 braked castor wheels and various points for strapping down.

​

This can also be supplied with our extra wide tyre rack with removable lower poles, this allows the lower poles to be re positioned higher up for transport purposes and therefore goes over the top of the a vehicle. Still allowing for the top level to be used as a tyre rack.

Wheeled Tool Box

Large wheeled tool box chest featuring 4 slide out draws on push to open runners and a removable front cover.

​

The top three draws measure 780L x 435D x 100Hmms and the fourth draw 780L x 435D x 150Hmms.

​

Beneath the draws are four plastic storage boxes, 2 x 400L x 300W x 170Hmms & 2 x 400L x 300W x 120Hmms.

​

To the side of the plastic boxes are two parts storage bins with multiple compartments.

​

External case dimensions = 880L x 550W x 1025Hmms.

Wheeled Roll Cabinet With Shelving

Featuring 12 storage boxes, removable cover allowing access to the boxes and six castor wheels (three braked) with storage above the boxes.

​

Box dimensions:

​

45 litre - 600x400x230mms x 8
90 litre – 600x400x420mms x 4

​

Shelf dimensions:

​

Top - 1675Lx250Hmms

2 x 833Lx250Hmms

External dimensions = 1730Lx670Dx1650Hmms
 

​

Available as individual units or as pairs through the offer shop.

Computer Cabinet With Slide Out Full Extension Draws  & Multi block Inside Case

Featuring 8 draws that slide out on draw runners, self retracting draw runners for the last 20mms provide resistance to prevent all draws opening at once, multi block with external power plug in point behind one of the open draw inside the case, removable cover and four castor wheels (two braked).

​

Draw dimensions:

​

Enclosed draws = 470Lx600Dx136Hmms x 6

Open front draw (highest) = 470Lx600Dx250Hmms x 1

Open front draw (lowest) = 470Lx600Dx250Hmms x 1

External dimensions = 560Lx760Dx1460Hmms
 

​

Available as individual units or as pairs through the offer shop and can be supplied with draws in every compartment rather than two with open front if required.

Wheeled Roll Cabinet with Storage Boxes, Shelving & Head Phone Hangers

Featuring 4 compartments, 5 removable boxes, multi block with external power plug in point, hangars for head sets, removable cover and six castor wheels (three braked).

​

Compartment dimensions:

​

Bottom left = 590Lx1000Hmms

Centre = 830Lx580Hmms

Bottom Right = 540Lx1000Hmms

​

65 litre boxes - 600x400x320mms x 5

External dimensions = 2030Lx670Dx1630Hmms
 

​

Available as individual units or as pairs through the offer shop.

Wheeled Flight Case With Shelves

Featuring 5 compartments, removable cover and six castor wheels (three braked).

​

Compartment dimensions from top to bottom:

​

1675Lx250Hmms

1266Lx320Hmms

1266Lx320Hmms

1266Lx330Hmms

Side - 400Lx988Hmms

External dimensions = 1720Lx670Dx1380Hmms
 

​

Available as individual units or as pairs through the offer shop.

Wheeled Roll Cabinet with Storage Boxes - XXL

Featuring 18 storage boxes, removable cover allowing access to the boxes and six castor wheels (three braked) with side storage measuring 1500Hx170L mms.

​

Box dimensions:

​

30 litre – 600x400x150mms x 8

45 litre - 600x400x230mms x 4
65 litre – 600x400x320mms x 4

160 litre - 800x600x380mms x 2

External dimensions = 1900Lx670Dx1660Hmms
 

​

Available as individual units or as pairs through the offer shop.

Wheeled Roll Cabinet with Storage Boxes and Shelf

Featuring 12 storage boxes, removable cover allowing access to the boxes and six castor wheels (three braked) with a shelf opening of 1675L x 290Hmms.

​

Box dimensions:

​

35 litre – 600x400x170mms x 8
55 litre – 600x400x280mms x 4

External dimensions = 1720Lx670Dx1175Hmms
 

​

Available as individual units or as pairs through the offer shop.

Wheeled Roll Cabinet with Storage Boxes - Extra Large (B12)

Featuring 12 storage boxes, removable cover allowing access to the boxes and six castor wheels (three braked).

​

Box dimensions:

​

45 litre – 600x400x220mms x 8
90 litre – 600x400x420mms x 4

External dimensions  1720Hx670Dx1120Hmms.
 

​

Available as individual units or as pairs through the offer shop.

Wheeled Roll Cabinet with Storage Boxes - Extra Large (B16)

Featuring sixteen storage boxes, removable cover allowing access to the boxes and six castor wheels (three braked).

​

Box dimensions:

​

20 litre – 600x400x100mms x 4
35 litre – 600x400x170mms x 4
45 litre – 600x400x220mms x 4
55 litre – 600x400x280mms x 4

​

External dimensions = 1720Lx700Dx1100Hmms

​

Available as individual units or as pairs through the offer shop.

Wheeled Roll Cabinet with Storage Boxes - Large

Featuring nine large storage boxes, removable lid allowing access to the boxes and six castor wheels (three braked).

​

The removable lids can be attached to the sides of the box as benches.

​

Box dimensions:

​

35 litre - 600x400x170mms x 3

55 litre - 600x400x280mms x 3

90 litre - 600x400x420mms x 3

​

External dimensions:

​

1260Lx640Wx1150Hmms

​

Available as individual units or as part of the pit equipment stage kits.

Wheeled Roll Cabinet with Storage Boxes - Small

Featuring 8 small storage boxes, a removable lid allowing access to the boxes, four castor wheels and flip out pull handles.

​

The removable lids can be attached to the sides of the box as benches.

​

Box dimensions:

​

35 litre - 600x400x170mms x 8

​

​

External dimensions:

​

850Lx640Wx950Hmms

​

Available as individual units or as part of the pit equipment stage kits.

​

​

Wheeled Roll Cabinet with Storage Boxes - Open Front

Featuring 9 removable storage boxes, four castor wheels, flip out pull handles and removable aluminium tubes for keeping the boxes in place during transit.

​

Box dimensions:

​

35 litre - 600x400x170mms x 6

55  litre = 600x400x280mms x 3

​

​

Available as individual units or as part of the pit equipment stage kits.

​

​

'Upside Down' Case - Engine Transport

Tis case has a shallow tray as the base, the main structure of the case lifts on making it ideal for transporting large objects, such as engines.

​

This can also be supplied with bolt down steel angle to mount to engine frame for stabilising during transport.

​

800x800x900Hmms - custom sizes upon request.

Tyre Racks / Tyre Racks With Removable Storage Boxes

Tyre rack: Fully TIG welded tyre racks, powder coated black featuring four swivel castor wheels.

​

1200mm or 800mm internal length for tyres up to 700mms in diameter, with two handles.

​

​

Tyre rack with removable storage boxes: 1200mm or 800mm internal length for tyres up to 700mms in diameter, with two handles on one end. Carrying five removable storage boxes, 4 x 120Hx600Dx400W and 1 x 220Hx600Dx400W mms.

​

Euro container trolley: Carrying five removable storage boxes, 4 x 120Hx600Dx400W and 1 x 220Hx600Dx400W mms.

Jerry Can Fuel Transport Flight Case

​

Partitioned to store four jerry cans and supplied with a free fluid transfer pump.

Foam lined, and features four swivel castor wheels, two flip out handles on each side and a hinge lid with butterfly lock latches.

​

Can also be produced for different fuel canisters.

Corner Weight Scale Storage Trolley

Designed to suit 15x15" scales and provide space for electronic control boxes.

​

With four castor wheels (two braked), a flip out handle, protective rubber bungs on each side and a rubber lined surface this neat trolley provides an ideal method to store valuable scales in your workshop.

Scale Pad Leveller Trolley

Designed to neatly store four of our scale pad levellers in the garage or workshop.

​

With four castor wheels (two braked), a flip out handle, and protective rubber bungs on each side.

Dolly Board

Dolly board with long handle extension, 18mms thick with four castor wheels. Available with different overall heights.

​

130mms overall = 1215x270mm board (300kgs uniformly distributed)

​

211mms overall =1215x405mm board (1000Kgs uniformly distributed)

​

Short dolly board - four castor wheels and carry handle. 

​

580 x 265 x 9mm with 125mm overall height (250Kgs uniformly distributed).

Wheel / Tyre Dolly Board

A circular board designed to stack tyres vertically, with a central pole connecting to a stud in the board. Available in a range of sizes:

​

• 550mm diameter, with four castor wheels & 35mm OD centre pole 1100mms in length.

• 660mm diameter, with five castor wheels & 44.5mm OD centre pole 1250mms in length.

• 720mm diamter, with five castor wheels & 44.5mm OD centre pole 1250mms in length.

They can also be custom made to order, please view the shop section of the website.

Flight Case - Scale and Pad Leveller Storage:

This large flight case has been designed to provide safe storage for valuable corner weight scales and pad levellers whilst being transportable to and from the circuit.

Each case is internally partitioned and provides space for four scales, four pad levellers and a removable shelf provides storage space for control boxes separately from the heavier components.

​

Recessed pull out handles on each side with four castor wheels makes the case easy to transport, two of which are braked to help with storage in transit. The case also has two butterfly latches with provision for a pad lock to securely fasten the lid.

​

This case is one of two that make up the flight case kit supplied with complete floor assemblies, but also available separately.

Flight Case - Set-up Floor Storage:

Part of a two case kit that transports VMEP set up floors. It's designed to cover all sizes of our 'stock floors' and does so by the use of removable shelving which allows for quick unloading and packing up at race circuits before and after use.

The case features six castor wheels, three of which on the front are braked, recessed pull out handles on each side, a hinged lid with gas struts and two butterfly lock latches on the front with provision for a pad lock.

​

Corner Weight Scale Flight Case

A partitioned flight case to store 4 x 15x15" scales.

​

Featuring four castor wheels, two braked, two flip out handles each side, a hinged lid and foam lining.

Flight Case - Medium Carry Case:

This partitioned case is designed to store smaller components with one central divider. 

The case features foam lining on all surfaces, two butterfly latches, two lid hinges and a handle mounted on the lid for transportation.

​

External dimensions = 480H x 410W x 190Dmms

​

This case is designed to fit the VMEP turn plates, but can also be used as a stand alone item.

​

Please view the relevant image for the internal case dimensions.

​

​

​

​

​

​

Medium Flight Case

Pit Kit

We are now offering a range of 'Pit Kits' to include, air jack feet, air jack skates, hub stands & pad levellers in one case so all the valuable equipment can be stored safely in one place.

​

Pit Kit Stage 1 = Two stage air jack feet, safety props & air jack skates (sets of 3/4 jacks).

​

Pit Kit Stage 2 = Two stage air jack feet, safety props, air jack skates & hub stands for string line use (sets of 3/4 jacks).

​

Pit Kit Stage 3 = Two stage air jack feet, safety props, air jack skates, hub stands for string line use, string line kits & roll on / roll off pad levellers: (sets of 3/4 jacks).